130w solar panel,solar power energy grid inverter 400w

Solar panel ,Grid tie inveter 1.compelet system 2.MPPT function 3.stable performance

130w Solar panel ,Grid tie inverter 400w

System Function

ldirectly connected to the solar panels (do not need to connect the battery) 

Using precise MPPT function, APL functions, the inverter automatically adjust the solar panels of maximum output power,simply connect the solar panel to the grid inverters. Do not need to connect the battery.

AC 0 angle with high precision auto-detection 

AC phase angle of 0 through isolation amplifier then input to the MCU for high-precision detection and analysis. The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together.

Synchronous High-frequency Modulation

In the process of the grid, usually adapt the same phase angle in parallel. (ie, When the two-phase alternating current total is equal to 0.Use switch to combination the two AC fusion) and the product is rectified AC half-frequency AC to 100Hz first, then the machine use the high frequency current in the circuit and semi-100Hz frequency alternating current generated combination, to achieve high-frequency modulation.

Pure Sine Wave Output

Use SPWM directly to make pure sine wave output.

Automatic Sensing Function Solar Luminosity

Use the latest luminosity perception operation technology. The different illuminate angle and intensity of the solar panel will produce different current output. Use advanced CPU to operate the different illuminance and the data can be directly displayed on the LCD. Then you can visually see the sense of the strength of the sun unit. Used more convenient.

Power Automatically Locked (APL)

In different current fluctuations, we should use the MPPT function. When the MPPT function adjusted to the maximum power point, the product automatically powers locked in maximum power point, then made the output power more stable.

Maximum Power Point Tracking (MPPT) 

Because the current intensity and the voltage changes at any time, if there is no power point tracking, there will be a lot of problems. In the past time, usually adopt a solar controller, but this product uses high-precision MPPT operation power, automatic and immediate adjust the solar panels output power at the  maximum output point, then achieve a stable output purposes.

Automatically Adapt To Different Load Power Factor 

Adapt to any of the power load.

  Constant Current, Constant Power 

This product is constant current, constant output power, without any overload, over-current phenomenon.

 Automatically Shut Down When The Power Output Of a Fault 

When the city power system is in failure, the inverter will automatically turn off the output.

 Current Limit Protection              

Current limit 

 Stack Multiple Machine

Multiple small power inverters in parallel can achieve large output power. 

 High-Frequency High Conversion Rate 

Adapt high frequency converter, the output more efficient.

130w Solar panel specification

solar panel watt	130w
size (mm)	1480*670*30
orientation	4*9
cells	15.3%
specification (mm)	156*156
Voc(V)	21.9
Vmp(V)	17.6
Isc(A)	8.12
Imp(A)	7.42

Grid tie inverter 400w specification

Grid-series models							400W
Recommend use solar panels							520Wp
DC Maximum Input Power							500W
DC maximum voltage	VpvDC30.2VDC
DC voltage range	Vpv 10.5V~28VDC
Maximum output power factor	99%
Maximum input current							25A
AC output power							400W
AC maximum output power						400W
Anti-voltage protection	Fuse
AC standard voltage range	90V 140,180 260VAC
AC frequency range	55Hz 63H, 45Hz 53Hz</t

Solar Panel Waranty :5 years

130w solar panel,solar power energy grid inverter 400w